APPLICATION
The Temart Hanger (T-Hanger) is a development of the L-hook, designed for a quick and secure mounting of artworks with different kinds of hanging systems and on any type of wall. The T-hanger's prime characteristics are:
- Usable for different types of hanging systems
- Adjustable height
- Anti-theft construction
- Load up to 40 kg/ T-hanger
- Usable on any type of wall
- Easy to use and time-saving
- Reusable

The T-hanger's adaptability becomes clear in handling loaned artworks. When different types of screw loops or similar are used in an exhibition, the T-hanger makes handling easier and prevents theft of hung objects. Reusability, as well as quick and secure mounting make the T-hanger a good investment.

TARGET GROUP
The T-Hanger has been developed for exchange exhibitions, art in public spaces, art Galleries, museums and the discerning private collector. With a T-hanger in the wall, it will usually not be necessary to make any physical intervention into artworks loaned for an exhibition. The T-Hanger is also used in churches to secure freestanding sculptures and ornaments.

DESCRIPTION
The vertical screwthread conforms to the SI System. The lower nut enables the step-free adjustment in height without special tools. The upper cupola nut has an anti-theft function. The cupola nut can be mounted and removed with a special tool. The powerful horizontal screwthread has an angle of ascent which enables quick and secure mounting into wood or plaster, as well as into wall plugs for plaster, concrete and brick. The wood screw end with a plate witha 2 mm hole in one corner. The plate increases the load tolerance and spreads the pressure over a larger area. The plate also covers the screw hole, the 2 mm hole being used to fix the screw in a vertical position in porous wall materials.

ACCESSORIES
OZZY

T-SCREW

FLEXDRIVE WITH MAGNETIC SLEEVE

DELIVERY
The T-Hanger is sold with adjustment nuts and lock nuts in packages containing 10 complete T-Hanger units. Flexdrive is delivered with a fixed magnetic sleeve.
Ozzy is delivered in two parts. Each package contains ten complete Ozzy units. The T-Screw comes with the first order of 10 T-Hanger units.

MOUNTING

GENERAL
The T-Hanger is quick and simple to mount. The use of correct accessories makes it simpler to work effectively and to reuse the T-Hanger for many years. The T-Screw makes work even easier and ensures that the wall and the T-Hanger cannot be damaged during mounting.
Whatever the wall material, the following points must be observed when the T-Hanger is in use:
- The T-Hanger must be screwed into the wall by hand. If normal hand pressure is insufficient, then the hole or the plug is too small, or too shallow. Drill the hole and/or change the plug!
- The vertical plate must never be screwed into the wall damaging the wall paint. The plate still fulfils its stabilising function even if it lies 3 mm from the wall.
- Stabilise the T-Hanger when mounting in porous material with a pin in the plate hole. The pin must not be hammered fully into the wall. Leave 5 mm sticking out so that dismantling is quicker.

MOUNTING IN WOOD AND PLANKS
The T-Hanger's wood screw is suitable for mounting directly into wood or wooden planks. A 3.5 mm pre-drilling simplifies the mounting. When mounting heavier objects in chipboard, the use of plastic plugs is recommended to increase the load tolerance of the hole in the chipboard.

MOUNTING IN PLASTERBOARD
When mounting in plaster walls, the T-Hanger can be used without plugs if the objects does not weigh more than 5 kg. Predrill in the same way as for wooden planks. The drill diameter can be reduced to 2 mm. For heavier objects, a 6 or 8 mm plaster plug can stabilise a hole in plasterboard.

MOUNTING IN CONCRETE WALL
When mounting in concrete or brick walls, suitable plugs must be used. See sketch. Follow instructions for predrilling and screw dimensions given with plugs.

SUMMARY

T-HANGER

ACCESSORIES