Written by Administrator
Friday, 14 August 2009 17:12
|
|
|
|
|
APPLICATION
The Flex Hang is a development of the L-hook and Temarts own T-hang , designed for a quick and secure mounting of artworks with different kinds of hanging systems and on any type of wall.
The Flex Hanger´s prime characteristics are:
- Usable for different types of hanging system
- Adjustable in height and width.
- Anti-theft construction
- Load up to appr. 40 kg/ Flex Hang
- Usable on any type of wall
- Easy to use and time-saving
- Reusable
TARGET GROUP
The Flex Hang has been developed for exchange exhibitions, art in public spaces, art Galleries, museums and the discerning private collector. With a Flex Hang in the wall, it will usually not be necessary to make any physical intervention into artworks loaned for an exhibition.
DESCRIPTION
The vertical screw thread conforms to the SI System. The lower nut enables the step-free adjustment in height without any special tools. The upper cupola nut has an anti-theft function. The cupola nut can be mounted and removed with a special tool. The two oval holes allow some horizontal adjustments. The Flex Hang is mounted with suitable screws depending of the material of the wall.
|
|
MATERIAL
The Flex Hang is entirely manufactured in strong and durable industrial steel. Electric galvanisation gives strong rust and abrasion protection.
|
|
SIZES (mm.)
|
|
Modell
|
A
|
B
|
C
|
|
Flex Hang M4
Art.no. 40-500
|
32 mm
|
9 mm
|
30 mm
|
|
Flex Hang M5
Art.no. 40-600
|
37 mm
|
12 mm
|
42 mm
|
|
Flex Hang M6
Art.no. 40-700
|
39 mm
|
23 mm
|
60 mm
|
|
|
DELIVERY
|
| For the model Flex Hang M5, the accessory ""Ozzy"" is included, enabling hanging of round screw loops as well as oval and rectangular hanging devices which may appear on loaned artworks. Ozzy consists of two components, the lower one enabling adjustment of height and the locking of hanging devices of different types. The other component is a washer with a long tongue to simplify mounting and contribute to anti-theft function. The washer is not always necessary to secure the artwork, but is always included in the delivery. |
|
|
|
|
ACCESSORIES
The Flex Hang is sold complete with adjustment nuts (ozzy), and lock nuts in packages containing 2 complete Flex Hang units.
Flex drive is delivered with a fixed magnetic sleeve. You can choose M4, M5 or M6.
|
|
FLEX DRIVE WITH MAGNETIC SLEEVE
The Flex drive allows you to mount or remove the cupola nut.
The Flex drive which is extendable up to 45 cm is used as an ordinary screw driver.
At the end of the Flex drive there is purpose made magnetic sleeve which will hold the cupola nut in correct position.
|
|
|
|
|
MOUNTING
GENERAL
Whatever the wall material, the following points must be observed when the Flex Hang is in use:
- The Flex Hang must be screwed into the wall by suitable screws.
MOUNTING IN WOOD AND PLANKS
Pre-drilling could simplify the mounting. When mounting heavier objects in chipboard, the use of plastic plugs is recommended to increase the load tolerance of the hole in the chipboard.
MOUNTING IN PLASTERBOARD
When mounting in plaster walls, the Flex Hang can be used without plugs if the objects does not weigh more than 5 kg. Predrill in the same way as for wooden planks. For heavier objects, plaster plug can stabilise the holes.
MOUNTING IN CONCRETE WALL
When mounting in concrete or brick walls, suitable plugs must be used.
|
|
SUMMARY FLEX HANG
|
Art. Nr.
|
Product
|
Load tolerance
kg/ Flex Hang
|
|
|
40-500
|
Flex Hang M4
|
20 kg
|
|
|
40-600
|
Flex Hang M5
|
40 kg
|
|
|
40-700
|
Flex Hang M6
|
50 kg
|
|
ACCESSORIES
|
Art. Nr.
|
Product
|
|
40-105
|
Sleeve key M-4
|
|
40-205
|
Sleeve key M-5
|
|
40-305
|
Sleeve key M-6
|
|
Last Updated ( Saturday, 30 January 2010 17:14 )
